DVI KVM over Fibre Optic, SC Multi-Mode, 2560x1600@400M, Dual Console, 2-Way Audio, EDID Copy, and Serial Extension, FXDDAS-M422
FXDDAS-M422 = FXDDAS-421P (PC) + FXDDAS-412S (Console)
DVI KVM over Fibre Optic, FXDDAS-M422, consists of a Console and a Computer unit that allows you to extend DVI-DL, Audio and USB signals up to 400M (1,312 ft) over SC M-M Fibre Optic Cabling.
Dual-User Access
Dual Console function allows two users to share computer both in local and remote areas. The local console FXDDAS-421P enables users to access computer directly, while the remote console FXDDAS-412S allows users to remotely control the computer as if you were sitting right in front of it. Hotkey functions and push buttons enable the user at Console/ PC Unit to exclusively access the computer.
Cascade Configuration: The dedicated Mask Hotkey function
DVI KVM over Fibre Optic, FXDDAS-M422 Mask Hotkey Switch located at the rear panel of both Console Unit and Computer Unit can be slid OFF/ON to switch hotkey control between the Computer (Default setting) and KVM Switch (Cascading) accordingly.
The hotkey commands of KVM Switches vary among models, which may cause hotkey errors, unwanted configurations between the Extender Unit and the mixed types of KVM Switches that connect to each other. To prevent from any conflict via hotkey commands in the cascade configuration, Hotkey Mask feature eliminates or simplifies all the hotkey control barriers caused by mixed combinations of KVM Extender and KVM Switch in cascading architecture; through the mask ON, users can bypass the Extender Unit and directly apply the KVM Switch’s built-in hotkey commands to access and configure the KVM Switch. You can easily expand the multiple computers control by adding the Extender with KVM Switch.
Unique bidirectional audio (Speaker and Mic) extension function independently transmits 2-way audio signal from the Transmitter (PC) unit to the Receiver (Console) unit, and vice versa. In the case of emergency situation, bidirectional audio transmission is beneficial for notifying users of the computer or server room operation issues making possible the remote communication and coordination.
Full-duplex data communication between Tx and Rx via fibre optic cable connection is the cost effective, hardware-based solution, providing remote access and control for all RS-232 protocol devices without any setup or configuration.
